Weighing Indicator
LP7510 Weighing Indicator
Specifications –
- Structure: Stainless Steel 304 Grade heavy duty
- Display: 6 digit 20 mm LED / 25mm LCD with backlight
- Functions: Print-output, Unit Conversion: Kg/Lb, Accumulation, TARE, Zero, Counting, check- weighing, Hi/Lo alarm, Over/Under/Accept Annunciator, animal and livestock stabilize weighing
- Load cell connection: 6 @ 350 ohm analog load cells or 12 @ 700 ohm
- External resolution (Division): up to 1/50,000D of the max capacity
- Interface (i10): Serial RS232 (to connect receipt Printer / computer)
- AC-DC 9V adaptor built-in 6V chargeable battery
- Over Load Protection and water-resistance keypad
The LCD with backlight is better for uses outdoor due to better visibility with sun light
LP7516 Weighing Indicator
Specifications –
- Accuracy Class III, n=3000e
- Max division: 15,000d
- Input single range: 0~12.8mv
- Load cell excitation: 3.3VDC
- Power: AC 110V/230V or 4VDC/4Ah rechargeable battery
- RS-232 Serial Port
- 6 digits 0.8” LED/LCD display with backlight
- ABS Enclosure, equipped with desktop bracket
- Key: Total hold tare zero set or Total unit tare zero set
- Drives up to four 350Ω load cells
- Automatic power off
- Low-battery remind
CAS DH Indicator
Specification –
DH Series is an advanced Floor scale with high resolution and various functions. It is suitable for use in all type of heavy industries.
- Display: Extra Large (XL) LED 51mm
- ABS Plastic
- Functions: Hold, Accumulation, TARE, Zero, Check Weight with alarm, Auto Calibration, Auto Zero, livestock stabilization, Illumination Level, Auto off
- Interface: Serial RS232
- Rechargeable battery
Weightx Indicator
Specifications –
- Structure: ABS Plastic covered by extra protection
- Display: 6 digit 20 mm LED / 25mm LCD with backlight
- Functions: Print-output, Unit Conversion: Kg/Lb, Accumulation, TARE, Zero, Counting, check- weighing, Hi/Lo alarm, Over/Under/Accept Annunciator, animal and livestock stabilize weighing
- Load cell connection: 6 @ 350 ohm analog load cells or 12 @ 700 ohm
- External resolution (Division): up to 1/50,000D of the max capacity
- Interface (i10): Serial RS232 (to connect receipt Printer / computer)
- AC-DC 9V adaptor built-in 6V chargeable battery
- Over Load Protection and water-resistance keypad
Ohaus Indicator
Specfictions –
- Structure: Stainless Steel 304 Grade heavy duty
- Resolution – 2000
- Battery life – 80 Hours with Rechargeable Battery
- Communication – RS232 Available
- Dimensions – 80 mm x 180 mm x 210 mm (LxHxW)
- Large Led Display
- Power – Rechargeable Battery (Included); AC Adapter (Included)
- Stabilization Time – 1s
- Units of Measurement- Kilogram; Gram; Pound